Pulp & Paper Mill in Brazil with Dura-Coat® High Temperature Putty 2000
Application Report Caustic Soda storage tank repaired with Dura-Coat® High Temperature Putty 2000. Localized repairs in areas of extreme corrosion.Dura-Coat® High Temperature Putty 2000 was applied in areas that were suffering from extreme corrosion in a pulp & paper mill. Dura-Coat® High Temperature Putty 2000 sealed off any leaks and it’s high chemical resistance will […]
Pulp & Paper in Chile with Dura-Coat® Metal 400 & NRX Nano Prime
Application Report Pulp & Paper drying equipment was suffering from corrosion due to the high humidity the paper process causes. A unique solution was required where the surface preparation couldn’t be through conventional means (blasting or mechanical prep.) due to the corrosion potential to contaminate their product. For this reason NRX was used to not […]
Cement Plant in Jamaica with Dura-Coat® Abrasion Fast 356HT
Application Report High pressure water lance in main crusher was suffering from extreme abrasion in a high temperature environment. Dura-Coat® Abrasion Fast 356HT is a abrasion, impact, and temperature resistant two part epoxy. With it’s quick 1 hour cure time, the repair was quickly performed and only lost 10% mass after 45 days in operation. […]
Paper Mill in Brazil with Dura-Coat® High Temperature Putty 2000
Application Report Paper Shower treated with Dura-Coat 2000 to repair and prevent further damage cause by corrosion. Wrap Steel Fiber Glass Wrap was also applied on top of the applied Dura-Coat to give extra structural support. Dura-Coat 2000 was applied in areas that were suffering from extreme corrosion in a pulp & paper mill. Dura-Coat […]
Petrochemical Heat Exchangers in Brazil with Dura-Coat 200HT Heat exchangers
Application Report Heat exchangers treated with Dura-Coat 200HT to protect against corrosion and leakage. Product was applied on heat exchanger in order to prevent leaks where the inner pipes are expanded in the tube sheet. Low temperature application that protects again corrosion. ■ Industry: Major Petrochemical ■ Location: Brazil ■ Operating condition: Cryogenic ■ Scope: […]
Kiln Baghouse and Proess Ductwork in Jamaica with Dura-Coat 200HT
Application Report Kiln Baghouse and Proess Ductwork treated with Dura-Coat 200HT to protect inside areas from corrosion Dura-Coat 200HT was applied in this project due to its high resistant to chemicals (In this case sulfuric acid) and its high temperature resistance. Previously no coating was applied and the corrosion caused can be seen in picture […]